Universidad Nacional de Educación a Distancia

Logotipo UNED 50 aniversario
  • en
  • es

Universidad Nacional de Educación a Distancia - UNED

fondo titulo
JOSE IGNACIO PEDRERO MOYA

JOSE IGNACIO PEDRERO MOYA

CATEDRÁTICO DE UNIVERSIDAD

MECÁNICA

ESCUELA TÉCN.SUP INGENIEROS INDUSTRIALES

jpedrero@ind.uned.es

(+34) 91398-6430

Academic Information

.

Research activity

Cylindrical gears:
   - Strength models.
   - Profile modification, load sharing, and transmission error.

Professional experience

Full Professor of Mechanical Engineering

Educational management experience

.

Research

RESEARCH GROUPS

  • Mechanical Engineering Design and simulation of gear transmissions; Biomechanics; Mechanical Engineering Education. + info

RESEARCH PROJECTS

  • Modelo para la simulación del reparto de carga y el error de transmisión de engranajes planetarios PID2022-142632OB-I00, Ministerio de Ciencia e Innovación, septiembre 2023 - agosto 2026
  • Simulación y control del error de transmisión en engranajes cilíndricos PID2019-110996RB-I00, Ministerio de Ciencia e Innovación, julio 2020 - febrero 2024
  • Distribución de carga y cálculo resistente de engranajes con geometría modificada DPI2015-69201-C2-1-R, Ministerio de Economía y Competitividad, enero 2016 - diciembre 2019
  • Modelos avanzados para cálculo resistente y análisis dinámico de engranajes cilíndricos no convencionales DPI2011-27661, Ministerio de Ciencia e Innovación, enero 2012 - junio 2016
  • Modelos de cálculo de engranajes cilíndricos especiales DPI2008-05787, Ministerio de Educación y Ciencia, enero 2009 - junio 2013
  • Simulación cinemática y dinámica de transmisiones por engranajes DPI2004-08305, Ministerio de Ciencia y Tecnología, diciembre 2004 - octubre 2008

N.º of recognized sections of research activity

6

Publications

  • PUBLICATIONS IN MAGAZINES Pedrero, J. I.; Sánchez, M. B.; Pleguezuelos, M.; “Analytical model of meshing stiffness, load sharing, and transmission error for internal spur gears with profile modification”, Mechanism and Machine Theory, vol. 197, 105650, 25 pp., 2024, doi:10.1016/j.mechmachtheory.2024.105650.

    Sánchez, M. B.; Pleguezuelos, M.; Pedrero, J. I.; “Influence of profile modification on the transmission error of spur gears under surface wear”, Mechanism and Machine Theory, vol. 191, 105473, 23 pp., 2024, doi:10.1016/j.mechmachtheory.2023.105473.

    Pedrero, J. I.; Pleguezuelos, M.; Sánchez, M. B.; “Analysis of the tip interference in low gear ratio internal spur gears with profile modification”, Forschung im Ingenieurwesen (Engineering Research), vol. 87, n. 3, pp. 891-900, 2023, doi:10.1007/s10010-023-00683-6.

    Pedrero, J. I.; Pleguezuelos, M.; Sánchez, M. B.; “Analytical model for meshing stiffness, load sharing, and transmission error for helical gears with profile modification”, Mechanism and Machine Theory, vol. 185, 105340, 23 pp., 2023, doi:10.1016/j.mechmachtheory.2023.105340.

    Pedrero, J. I.; Sánchez, M. B.; Guerra, D.; Calvo-Irisarri, J.; Pleguezuelos, M.; Fernández-Sisón, A.; “Minimum friction losses in planetary stages of wind turbine gearboxes”, Mathematical Problems in Engineering, vol. 2022, 14 pp. (Open Access), 2022, doi:10.1155/2022/5111827.

    Pedrero, J. I.; Martínez-López, D.; Calvo-Irisarri, J.; Pleguezuelos, M.; Sánchez, M. B.; Fernández-Sisón, A.; “Minimum friction losses in wind turbine gearboxes”, Forschung im Ingenieurwesen (Engineering Research), vol. 86, n. 3, pp. 321-330, 2022, doi:10.1007/s10010-021-00526-2.

    Vicente, E.; Aneas, E.; Pedrero, J. I.; “Design of gear reducer for vehicle powered by in-wheel electric motor”, Dyna, vol. 97, n. 4, pp. 374-379, 2022, doi:10.6036/10494.

    Pedrero, J. I.; Pleguezuelos, M.; Sánchez, M. B.; “Influence of meshing stiffness on load distribution between planets of planetary gear drives”, Mechanism and Machine Theory, vol. 170, 104718, 16 pp., 2022, doi:10.1016/j.mechmachtheory.2021.104718.

    Pleguezuelos, M.; Sánchez, M. B.; Pedrero, J. I.; “Analytical model for meshing stiffness, load sharing, and transmission error for spur gears with profile modification under non-nominal load conditions”, Applied Mathematical Modelling, vol. 97, pp. 344-365, 2021, doi:10.1016/j.apm.2021.03.051.

    Pleguezuelos, M.; Sánchez, M. B.; Pedrero, J. I.; “Control of transmission error of high contact ratio spur gears with symmetric profile modifications”, Mechanism and Machine Theory, vol. 149, 103839, 16 pp., 2020, doi:10.1016/j.mechmachtheory.2020.103839.

    Pedrero, J. I.; Pleguezuelos, M.; Sánchez, M. B.; “Load sharing model for high contact ratio spur gears with long profile modifications”, Forschung im Ingenieurwesen (Engineering Research), vol. 83, n. 3, pp. 401-408, 2019, doi:10.1007/s10010-019-00379-w.

    Sánchez, M. B.; Pleguezuelos, M.; Pedrero, J. I.; “Influence of profile modifications on meshing stiffness, load sharing, and transmission error of involute spur gears”, Mechanism and Machine Theory, vol. 139, pp. 506-525, 2019, doi:10.1016/j.mechmachtheory.2019.15.014.

    Sánchez, M. B.; Pleguezuelos, M.; Pedrero, J. I.; “Strength model for bending and pitting calculations of internal spur gears”, Mechanism and Machine Theory, vol. 133, pp. 691-705, 2019, doi:10.1016/j.mechmachtheory.2018.12.016.

    Pleguezuelos, M.; Sánchez, M. B.; Pedrero, J. I.; “Approximate equations for the meshing stiffness and the load sharing ratio of spur gears including hertzian effects”, Mechanism and Machine Theory, vol. 109, pp. 231-249, 2017, doi:10.1016/j.mechmachtheory.2016.11.014.

    Nutakor, C.; Klodowsky, A.; Sopanen, J.; Mikkola, A.; Pedrero, J. I.; “Planetary gear sets power loss modeling: Application to wind turbines”, Tribology International, vol. 105, pp. 42-54, 2017, doi:10.1016/j.triboint.2016.09.029.

    Sánchez, M. B.; Pleguezuelos, M.; Pedrero, J. I.; “Calculation of tooth bending strength and surface durability of internal spur gear drives”, Mechanism and Machine Theory, vol. 95, pp. 102-113, 2016, doi:10.1016/j.mechmachtheory.2015.09.001.

    Sánchez, M. B.; Pleguezuelos, M.; Pedrero, J. I.; “Tooth-root stress calculation of high transverse contact ratio spur and helical gears”, Meccanica, vol. 49, n. 2, pp. 347-364, 2014, doi:10.1007/s11012-013-9799-3.

    Pleguezuelos, M.; Pedrero, J. I.; Sánchez, M. B.; “Analytical expressions of the efficiency of standard and high contact ratio involute spur gears”, Mathematical Problems in Engineering, vol. 2013, 14 pp. (Open Access), 2013, doi:10.1155/2013/142849.

    Sánchez, M. B.; Pedrero, J. I.; Pleguezuelos, M.; “Contact stress calculation of high transverse contact ratio spur and helical gear teeth”, Mechanism and Machine Theory, vol. 64, pp. 93-110, 2013, doi:10.1016/j.mechmachtheory.2013.01.013.

    Sánchez, M. B.; Pedrero, J. I.; Pleguezuelos, M.; “Critical stress and load conditions for bending calculations of involute spur and helical gears”, International Journal of Fatigue, vol. 48, pp. 28-38, 2013, doi:10.1016/j.ijfatigue.2012.11.015.

    Sánchez, M. B.; Pleguezuelos, M.; Pedrero, J. I.; “Enhanced model of load distribution along the line of contact for non-standard involute external gears”, Meccanica, vol. 48, n. 3, pp. 527-543, 2013, doi:10.1007/s11012-012-9612-8.

    Pedrero, J. I.; Pleguezuelos, M.; Muñoz, M.; “Contact stress calculation of undercut spur and helical gear teeth”, Mechanism and Machine Theory, vol. 46, n. 11, pp. 1633-1646, 2011, doi:10.1016/j.mechmachtheory.2011.06.015.

    Pedrero, J. I.; Pleguezuelos, M.; Muñoz, M.; “Critical stress and load conditions for pitting calculations of involute spur and helical gear teeth”, Mechanism and Machine Theory, vol. 46, n. 4, pp. 425-437, 2011, doi:10.1016/j.mechmachtheory.2010.12.001.

    Pedrero, J. I.; Pleguezuelos, M.; Artés, M.; Antona, J. A.; “Load distribution model along the line of contact for involute external gears”, Mechanism and Machine Theory, vol. 45, n. 5, pp. 780-794, 2010, doi:10.1016/j.mechmachtheory.2009.12.009.

    Pedrero, J. I.; Vallejo, I. I.; Pleguezuelos, M.; “Calculation of tooth bending strength and surface durability of high transverse contact ratio spur and helical gear drives”, Journal of Mechanical Design, vol. 129, n. 1, pp. 69-74, 2007, doi:10.1115/1.2403773.
  • PUBLICATIONS AT CONFERENCES Ulacia, I.; Sánchez, M. B.; Iñurritegui, A.; Arana, A.; Larrañaga, J.; Pedrero, J. I.; “Theoretical analysis of transmission error in rack and pinion systems”, MATEC Web of Conferences, vol. 387, 01001, 6 pp., 2023. doi:10.1051/matecconf/202338701001.

    Pleguezuelos, M.; Pedrero, J. I.; Sánchez, M. B.; Vicente, E.; “Influence of wear on load sharing and transmission error of spur gears with profile modifications”, Machine and Industrial Design in Mechanical Engineering, pp. 111-119, 2021, doi:10.1007/978-3-030-88465-9_8.

    Pedrero, J. I.; “Analytical model for spur gears with profile modification: simulation of the meshing stiffness, load sharing, and transmission error”, Machine and Industrial Design in Mechanical Engineering, pp. 3-26, 2021, doi:10.1007/978-3-030-88465-9_1.

    Pedrero, J. I.; Sánchez, M. B.; Pleguezuelos, M.; “Load sharing and quasi-static transmission error of non-standard tooth height spur gears”, New Trends in Mechanism and Machine Science, pp. 231-238, 2020, doi: 10.1007/978-3-030-55061-5_26.

    Pleguezuelos, M.; Sánchez, M. B.; Pedrero, J. I.; “On the evaluation of the meshing stiffness of external spur gears”, MATEC Web of Conferences, vol. 317, 01002, 6 pp., 2020. doi:10.1051/matecconf/202031701002.

    Pedrero, J. I.; Pleguezuelos, M.; Sánchez, M. B.; “Analytical simulation of the tooth contact of spur gears”, New Approaches to Gear Design and Production, pp. 115-131, 2020, doi:10.1007/978-3-030-34945-5_4.

    Pedrero, J. I.; Pleguezuelos, M.; Sánchez, M. B.; “Study of the tooth contact for high contact ratio spur gears with long tip relief”, MATEC Web of Conferences, vol. 287, 01004, 9 pp., 2019. doi:10.1051/matecconf/201928701004.

    Pleguezuelos, M.; Sánchez, M. B.; Pedrero, J. I.; “Load transfer among spur gear teeth with tip relief under non-nominal loading conditions”, Mechanism and Machine Science, Aachen (Alemania), pp. 299-306, 2018, doi:10.1007/978-3-319-98020-1_35.

    Pedrero, J. I.; Pleguezuelos, M.; Sánchez, M. B.; “On the determination of the meshing stiffness and load sharing of spur gears”, New Trends in Mechanism and Machine Science, Nantes (Francia), pp. 221-229, 2016, doi:10.1007/978-3-319-44156-6_23.

    Pleguezuelos, M.; Pedrero, J. I.; Sánchez, M. B.; “Load sharing and contact stress calculation of high contact ratio internal spur gears”, New Trends in Mechanism and Machine Science, Guimaraes (Portugal), pp. 771-778, 2014, doi:10.1007/978-3-319-09411-3_81.

    Pedrero, J. I.; Sánchez, M. B.; Pleguezuelos, M.; “Load sharing model for non-standard involute spur gears”, New Trends in Mechanism and Machine Science, Santander, pp. 347-355, 2012, doi:10.1007/978-94-007-4902-3_37.

    Pleguezuelos, M., Pedrero, J. I., Sánchez, M. B.; “Analytical model of the efficiency of spur gears: study of the influence of the design parameters”, Proc. ASME International Power Transmission and Gearing Conference, Washington D. C. (USA), 2011, doi:10.1115/DETC2011-47662.

    Pedrero, J. I.; Pleguezuelos, M.; Muñoz, M.; “Simplified calculation method for the efficiency of involute spur gears”, Proc. ASME International Power Transmission and Gearing Conference, San Diego (California, USA), 2009, doi:10.1115/DETC2009-87179.

    Pedrero, J. I.; Pleguezuelos, M.; Aguiriano, S.; “Load distribution model for involute internal gear sets”, Proc. X ASME International Power Transmission and Gearing Conference, Las Vegas (Nevada, USA), 2007, doi:10.1115/DETC2007-34092.
  • PUBLICACIONES EN LÍNEA Ir a Orcid

    Ir a Publons

    Ir a Scopus

    Ir a Google Scholar

    Ir a ResearchGate