Publications

• PUBLICATIONS IN MAGAZINES
  1. BM Bañales, G San Miguel, D Ruiz, S Álvarez, J Pérez, MT Arredondo. Carbon footprint and employment in the deployment and operation of ICT networks for internet deployment. Science of the Total Environment. 2024.  914, 163817, ISSN 0048-9697.
  2. G San Miguel, I Martín-Girela, D Ruiz, G Rocha, MD Curt, PL Aguado, J Fernández. Environmental and economic sustainability of a floating constructed wetland to rehabilitate eutrophicated waterways. Science of the Total Environment. 2023.  884, 163817, ISSN 0048-9697.
  3. J Pérez, F Hernández, G San Miguel, D Ruiz, MT Arredondo. Analysing associations between digitalization and the accomplishment of the Sustainable Development Goals. Science of the Total Environment. 2023.  857(3), 159700, ISSN 0048-9697. 
  4. D Ruiz, G San Miguel, J Rojo, JG Teriús-Padrón, E Gaeta, MT Arredondo, JF Hernández, J Pérez. Life cycle inventory and carbon footprint assessment of wireless ICT networks for six demographic areas. Resources, Conservation and Recycling. 2022.  176, 105951, ISSN 0921-3449.
  5. G San Miguel, D Ruiz. Environmental sustainability of a pork and bean stew. Science of The Total Environment. 2021. 798, 149203, ISSN 0048-9697. 
  6. Muñoz, E. Cifrian, A. Andrés, G. San Miguel, D. Ruiz, J.R. Viguri. Analysis of environmental benefits associated with the incorporation of Waelz slag into fired bricks using LCA. Construction and Building Materials. 2018.  168, 178–186.  
  7. D. Ruiz, G. San Miguel, B. Corona, F.R. López. LCA of a multifunctional bioenergy chain based on pellet production. Fuel. 2018.  215, 601–611. 
  8. D. Ruiz, G. San Miguel, B. Corona, A. Gaitero, A. Domínguez. Environmental and economic analysis of power generation in a thermophilic biogas plant. Science of the Total Environment. 2018. 633, 1418–1428. 
  9. R. Carabaño, S.M. Hernando, D. Ruiz, C. Bedoya. Life Cycle Assessment (LCA) of building materials for the evaluation of building sustainability: the case of thermal insulation materials. Revista de la Construcción. 2017. Vol.16 n1. 
  10. Corona B, Ruiz D, San Miguel G. Life Cycle Assessment of a HYSOL Concentrated Solar Power Plant: Analyzing the Effect of Geographic Location. Energies. 2016.  9:413. 
  11. R. Carabaño, R. Pastor, C. Bedoya, D. Ruiz. Comparative Life Cycle Assessment of the Conventional Façade SOS Natura and the Natural Water Tank Façade. Construction & Building Materials. 2016. 105, 563-571. 
  12. San Miguel, G., Corona, B., Ruiz, D., Landholm, D., Laina, R., Tolosana, E., Sixto, H., Cañellas, I. Environmental, energy and economic analysis of a biomass supply chain based on a poplar short rotation coppice in Spain. Journal of Cleaner Production. 2015. 94(0), 93-101. 
  13. R. Carabaño, C. Bedoya, D. Ruiz. Análisis de ciclo de vida de una nueva solución arquitectónica que mejora el rendimiento térmico de la envolvente del edificio: Fachada Natural Aljibe. Informes de la Construcción. 2014. 66 (535), e034. ISSN-L: 0020-0883. doi:https://dx.doi.org/10.3989/ic.12.128. 
  14. P.D. Castillo, D. Olmos, D. R. Amador, J. González. Real dispersion of isolated fumed silica nanoparticles in highly filled PMMA prepared by high energy ball milling. Journal of Colloid and Interface Science. 2007.  308-2, 318-324. 
  15. J.B.Fogagnolo, D.R. Amador, E.M.Ruiz-Navas, J.M. Torralba. Solid solution in Al–4.5 wt% Cu produced by mechanical alloying. Materials Science and Engineering, A. 2006. A, 433, Issues 1–2, 45-49. 
  16. D. R. Amador, M.A. Monge, J. M. Torralba, R. Pareja. Strain-enhanced sintering of iron powders. Applied Physics. 2005. A, 80, 803 - 818. 
  17. D. R. Amador, J. M. Torralba. Study of PM alloyed steels with Ni-Cu prealloyed powders. Journal of Materials Processing Technology. 2003. 143-144, 781-785. 
  18. D. R. Amador, J. M. Torralba. Morphological and microstructural characterisation of low-alloying Fe powder obtained by mechanical attrition. Journal of Materials Processing Technology. 2003. 143-144, 776 - 780. 
  19. V. de Castro, T. Leguey, M.A. Monge, A. Muñoz, R. Pareja, D.R. Amador, J. M. Torralba, M. Victoria. Mechanical dispersión of Y2O3 nanoparticles in steel EUROFER 97: process and optimisation. Journal of Nuclear Materials. 2003. 332, 228 – 234. 
  20. D. Ruiz. Colaboraciones en Ciencias de la Naturaleza: Evaluación ambiental en Ciencia e Ingeniería de Materiales. Revista 100cias@uned, Nueva época. 2013. N. 6, pp. 64-69. ISSN: 1989-7189.

  21. Cortes, F., Viejo, A., Sicre-Artalejo, J., Campos, M., Torralba, J. M., & Amador, D. R. Development of diffusion-alloyed powders using Cu-Ni diffusion-alloyed particles on Fe and Fe-Mo base materials. Powder Metallurgy Progress. 2009. 9(2), 79-86.

  22. J. M. Torralba, E. Gordo, A. Jiménez-Morales, E.M. Ruiz-Navas, M. Campos, M.E. Rabanal, D. R. Amador, New Developments in Powder Technology, Advanced Materials Research. 2007. Vol. 23, pp. 1-8. Oct. doi:10.4028/www.scientific.net/AMR.23.1
  23. N. Candela, R. Plaza, D.R. Amador, F. Velasco, J.M. Torralba. Influencia de diferentes tratamientos termoquímicos en aceros sinterizados base molibdeno. Revista de Metalurgia. 2001. 37, 115-118.
• PUBLICATIONS AT CONFERENCES
  1. D. Ruiz, San Miguel, B. Coronas, I. González. Life Cycle Assessment of bamboo (guadua angustifolia) stems as building material for structural applications. 9th International Conference of the environmental and Technical Implications of Construction with Alternative Materials (WASCON2015). Santander, Spain. 10-12 June 2015. Abstracts of WASCON2015 – Resource Efficiency in Construction ISBN: 978-84-606-8522-0, Page 93-94. 
  2. Gutiérrez-Martín F., Corona B., Ruiz D., San Miguel Pre-investigation of power-to-gas technologies for energy storage at large scales. Proceedings of the HYPOTHESIS11- Hydrogen to Power Theoretical and Engineering Solutions International Symposium. Toledo, Spain, 6 – 9 September 2015. 
  3. Muñoz, I., Quijorna, N., Andrés, A., San Miguel, G., Ruiz, D., Viguri, J. R. Application of LCA to evaluate the valorization of Waelz slag into ceramic bricks.  Proceedings of the International Conference on Green Chemistry and Sustainable Engineering. Barcelona. 29-31 de julio 2014.
  4. Ruiz, D., Carabaño, R., Bedoya, C. Integración de criterios ambientales en el diseño de los módulos Naturpanel ALJIBE® para fachadas vegetadas. Memoria ECODAL: 1º Congreso Latinoamericano de Ecodiseño, Santiago de Chile. 21-24 octubre 2014. ISSN 0719-577X.
  5. Ruiz, D., Alonso, I., Tumini,I. Uzábal, A., Gonzalez, A. 2014. ECÓMETRO: Herramienta de ecodiseño para la evaluación ambiental de edificios. Memoria ECODAL: 1º Congreso Latinoamericano de Ecodiseño, Santiago de Chile. 21-24 octubre 2014. ISSN 0719-577X.
  6. Carabaño, R., Galván, J., Bedoya, C., Ruiz, D. La utilización del corcho como material de aislamiento térmico para una construcción sostenible. I Congreso Internacional sobre Construcción y Tecnología Arquitectónica. Madrid, España. 11-13 Junio 2001.
  7. Carabaño, R., Bedoya, C., Ruiz, D. La metodología del análisis de ciclo de vida para la evaluación del impacto ambiental en el sector de la construcción: estado del arte. I Congreso Internacional sobre Construcción y Tecnología Arquitectónicas. Madrid, España. 11-13 Junio 2001.
  8. Alonso, L.A., Carabaño, R., Chanampa, M., García, J., Hernández-Martínez, M.C., Orondo, J., Ruiz, D., v. de la Rosa, M.A., Vidal, P., García-Santos, A., Olivieri, F., Bedoya, C. Metodología de ecoinnovación PDCA, aplicada al prototipo de fachada vegetal aljibe Natura. I Congreso Edificios Energía Casi Nula. Ed.: Grupo Tecma RED, Madrid, 7-8 mayo 2012, pp. 72-80 ISBN: 978-84-695-3378-9.
  9. Alonso, L.A., Carabaño, R., Chanampa, M., García, J., Hernández-Martínez, M.C., Orondo, J., Ruiz, D., v. de la Rosa, M.A., Vidal, P., García-Santos, A., Olivieri, F., Bedoya, C. Definition and study of the innovative façade Natura, made of independent pre-vegetated and water storage type panels. VI International Congress on Architectural Envelopes. Ed.: Tecnalia Research & Innovation. ISBN 978-84-88734-08-2 (pág. 233-242). San Sebastian, España.
  10. I.Echeverría, C. Alonso, A.Sanchez, A. Gonzalez, D. Di Siena, J. Chamorro, D.Ruiz Amador, R. Fernandez, A. Guerrero. Ecómetro, una herramienta abierta, libre en beta permanente para la evaluación ambiental de edificios. National Congress of Environment CONAMA. Madrid (Spain), 26-30 noviembre 2012.
  11. F.Cortés, A. Viejo, J. Sicre-Artalejo, M. Campos, J.M. Torralba, D. Ruiz Amador. Development of difusión-alloyed powders using Cu-Ni pre-alloyed particles on Fe and Fe-Mo base Materials. European Congress and Exhibition on Powder Metallurgy Euro-PM2008. Mannhein (Germany). 2009.
  12. D. Ruiz Amador, J.M. Torralba. Mass transport mechanisms in mechanically alloyed Fe powders based on isothermal dilatometric experiments. Sintering 05. Grenoble (France). 2005, 283-286.
  13. C.Pascal, F. Doré, D. Ruiz Amador, P. Doremus, J.M. Chaix, C.H. Allibert. Design of multimaterial processed by powder metallurgy for multifunctional application. In Proceedings of the 4th international conference on science, Technology and applications of sintering, Grenoble, France (pp. 212-215).
  14. Fogagnolo, J.B.; Amador, D.; Morales, F.; Ruiz-Navas, E.M.; Torralba, J.M., “Powder Characterization of Al-Cu Produced by Mechanical Alloying”, PM 2002– World Congress on Powder Metallurgy & Particulate Materials; 2002, Orlando, EEUU, vol. 1, p. 191-197. ISBN: 1-878954-90-3
  15. D. Ruiz Amador, J.M. Torralba. Study of PM alloyed steels with Ni-Cu prealloyed powders. AMPT’01 Internacional Conference on Advances in Materials and Processing Technologies. Leganés (Spain), 18-21 September 2001, vol. 3, pp 1281-1286, ISBN 8495821052.
  16. D. Ruiz Amador, J.M. Torralba. Morphological and microstructural characterization of alloying Fe powders obtained by mechanical attrition. AMPT’01 Internacional Conference on Advances in Materials and Processing Technologies. Leganés (Spain), 18-21 September 2001, vol. 3, pp 1203-1207, ISBN 8495821052.
  17. D. Ruiz Amador, F. Velasco, N. Candela. Sintering temperature determination of alloyed steels with Ni-Cu prealloyed powders. 9th International Scientific Conference achievements in mechanical and materials engineering. Proceedings of the 9th International Scientific Conference Achievements in Mechanical & Materials Engineering: Gliwice-Sopot-Gdansk, Poland, October 15-18, 2000. ISBN: 8391445801.
• PUBLICATIONS AT CONFERENCES Análisis de Ciclo de Vida y Huella de Carbono. 2012. Editorial UNED. ISBN: 987-84-362-6563-7.